Enjoy Your Outdoor Spaces Without Compromising Your View
The Sunflex SF25 slide and turn system’s timeless design makes it suitable for outside enclosures, such as balconies, terraces and patios.
Alternatively it can be used to create a flexible, contemporary and useable open space internally as room dividers for both living and working environments.
The first opening panel acts as a single access point, each individual panel then slides independently back across to the same side to stack. This allows you to have as much or as little of the glass wall open at any one time. The system can open to the inside or outside and stack to the left or the right or split to stack on both sides. The single in-line running track caters for a wide range of applications. This allows the glass panels to slide from 90° to any angle change up to 180°, including segmented curved radius openings.
An ideal product for all year round, keeping away the worst of the winter weather with minimum impact on a building’s design and during the summer months can be opened completely to make the most of these precious times.
System Features SUNFLEX SF25
height compensation profile allows a height adjustment of up to 22 mm
intergrated hinge support system - optimal panel guidance without guide arm when opening and closing
flush guider arm with dust cover (without disturbing guiding elements)
toughened safety glass bolted - glass thickness 8 or 10mm possible
corner angle continuously adjustable for upper rail and height compensation profile
rustproof carriage system fitted with triple smooth-bearing needle bearings; arched intake guide (completely stainless carriage system)
locking and unlocking possible by turn knob or optionally by a lockable lock
PROFILE TECHNOLOGY
- frameless glass design / slide and turn system
- option of bottom track that can be recessed in to the floor for a flush finish or a drainage track ideal
- according to DIN 18 025
- nach DIN 18 025 verwendbar
- inward or outward opening of the panels possible
- height compensation of up to 22mm
CERTIFIED TESTS
- sound reduction with 10mm glass, without sealing strips, according to DIN EN ISO 10140-2 Rw=22dB
- sound reduction with 10mm glass, with sealing strips, according to DIN EN ISO 10140-2 Rw=34dB
- measurement of deflection class 3 according to EN 12211/12210 (8mm, 10mm glass)
- wind suction class 3 according to EN 12211/12210 (8mm, 10 mm glass)
- safety test class 3 according to EN 12211/12210 (8mm, 10 mm glass)
FITTING TECHNOLOGY
- all fittings are concealed in the profiles
- low-wear, non-corroding and low maintenance fittings
- inside and/or outside locking and unlocking is possible
- locking and unlocking by a user-friendly knob (optionally available with a lock)
- the first panel may be equipped with a profile cylinder lock to prevent unauthorized opening
RUNNING GEAR SYSTEMS
- horizontal running mechanism
- low-noise, wear-resistant, heat- and cold-resistant running surface
- all metal components of the running mechanism are made of stainless steel
- the running mechanism consists of 3 smooth-running needle bearings & 2 carbon fibre reinforced polyamide wheels
- the glass panels can be slided from 90° to any angle change up to 180°, including segmented curved radius opening
SEALING & VENTILATION
- gap of approximatively 2-4 mm between the panels
- optionally with slim vertical transparent PVC seals which are coupled to the glass
- double brush seal with plastic bridge at top and bottom of the glass panels
- lower and upper brush gaskets are attached to the panel frames and not to the bottom track
GLAZING
- supplied with toughened glass either 8mm or 10mm, depending upon height and requirements
- panels are secured by a concealed screw-fixing system in the upper and lower profiles of each panel
- subsequent replacement of the glasses is no problem
DRAINAGE
- catch channel at the inside of the bottom track to drain condensation water and cleaning materials
- internal drainage channel track to remove any condensation or flush track option
- pressure-free drainage of bottom track by inclined floor construction