Sunflex SF25 frameless terrace glazing - AMASVISTA Glass

enjoy your outdoor spaces without compromising your view

 

The Sunflex SF25 slide and turn system’s timeless design makes it suitable for outside enclosures, such as balconies, terraces and patios. Alternatively it can be used to create a flexible, contemporary and useable open space internally as room dividers for both living and working environments.
The first opening panel acts as a single access point, each individual panel then slides independently back across to the same side to stack. This allows you to have as much or as little of the glass wall open at any one time. The system can open to the inside or outside and stack to the left or the right or split to stack on both sides. The single in-line running track caters for a wide range of applications. This allows the glass panels to slide from 90° to any angle change up to 180°, including segmented curved radius openings.
An ideal product for all year round, keeping away the worst of the winter weather with minimum impact on a building’s design and during the summer months can be opened completely to make the most of these precious times.

system information / features

SUNFLEX Schiebe-Dreh-System SF25 Highlight 03
height adjustment profile with flange; screw cover with clip-on screen
SUNFLEX Schiebe-Dreh-System SF25 Highlight 07
flush guider arm with dust cover (without disturbing guiding elements)
SUNFLEX Schiebe-Dreh-System SF25 Highlight 08
intergrated hinge support system - optimal panel guidance without guide arm when opening and closing
SUNFLEX Schiebe-Dreh-System SF25 Highlight 01
height compensation profile allows a height adjustment of up to 22 mm
SUNFLEX Schiebe-Dreh-System SF25 Highlight 05
toughened safety glass bolted - glass thickness 8 or 10mm possible
SUNFLEX Schiebe-Dreh-System SF25 Highlight 04
rustproof carriage system fitted with triple smooth-bearing needle bearings; arched intake guide (completely stainless carriage system)
SUNFLEX Schiebe-Dreh-System SF25 Highlight 09
corner angle continuously adjustable for upper rail and height compensation profile
SUNFLEX Schiebe-Dreh-System SF25 Highlight 06
locking and unlocking possible by turn knob or optionally by a lockable lock
SUNFLEX Schiebe-Dreh-System SF25 Highlight 02
height compensation profile with horizontal and vertical flange
profile technology

frameless glass design

option of bottom track that can be recessed in to the floor for a flush finish or a drainage track ideal

according to DIN 18 025

inward or outward opening of the panels possible

choice of panel partition and sliding direction

height compensation of up to 22mm

certified tests

sound reduction with 10mm glass, with sealing strips, according to DIN EN ISO 10140-2 Rw=34dB

sound reduction with 10mm glass, without sealing strips, according to DIN EN ISO 10140-2 Rw=22dB

measurement of deflection class 3 according to EN 12211/12210 (8mm, 10mm glass)

wind suction class 3 according to EN 12211/12210 (8mm, 10 mm glass)

safety test class 3 according to EN 12211/12210 (8mm, 10 mm glass)

fitting technology

all fittings are concealed in the profiles

low-wear, non-corroding and low maintenance fittings

inside and/or outside locking and unlocking is possible

locking and unlocking by a user-friendly flat handle

the first panel may be equipped with a profile cylinder lock to prevent unauthorized opening

running gear system

horizontal running mechanism

low-noise, wear-resistant, heat- and cold-resistant running surface

all metal components of the running mechanism are made of stainless steel

the running mechanism consists of 3 smooth-running needle bearings & 2 carbon fibre reinforced polyamide wheels

the glass panels can be slided from 90° to any angle change up to 180°, including segmented curved radius openings

sealing & ventilation

gap of approximatively 2-4 mm between the panels

optionally with slim vertical transparent PVC seals which are coupled to the glass

double brush seal with plastic bridge at top and bottom of the glass panels

lower and upper brush gaskets are attached to the panel frames and not to the bottom track

glazing

supplied with toughened glass either 8mm or 10mm, depending upon height and requirements

panels are secured by a concealed screw-fixing system in the upper and lower profiles of each panel

subsequent replacement of the glasses is no problem

drainage

supplied with toughened glass either 8mm or 10mm, depending upon height and requirements

panels are secured by a concealed screw-fixing system in the upper and lower profiles of each panel

subsequent replacement of the glasses is no problem

Downloads

 

All information about the sliding door system SF25 are just one click away.

Broschüre Sunflex Schiebe-Dreh-Systeme

slide and turn systems

Sunflex
brochure Sunflex slide and turn systems
Sunflex Prüfungszeugnis SF25 PIV 10mm

Sunflex test certificate

Sunflex
Sunflex test certificate SF25 PIV 10mm
Sunflex Prüfungszeugnis SG Bauakustik SF25

Sunflex test certificate

Sunflex
Sunflex test certificate SG building acoustics SF25